How To Reset Mitsubishi Outlander Radio

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for AudioLover.com, at no extra cost. Learn more)

Introduction

Welcome to our guide on how to reset the radio in a Mitsubishi Outlander. If you’ve been experiencing issues with your radio, such as it not turning on, not playing any sound, or displaying an error message, a reset may be the solution. Resetting the radio can help to resolve minor glitches and restore the functionality of the system.

The Mitsubishi Outlander is equipped with a variety of radio systems, including touch screen displays, CD players, and AM/FM radios. The methods for resetting the radio may vary depending on the specific model and year of your Outlander, but we will cover the most common methods in this guide.

Before attempting any of the methods, it’s important to note that resetting the radio will usually result in the loss of any saved settings, such as radio presets or Bluetooth connections. However, it will not affect the vehicle’s other systems or settings.

In this guide, we will explore several methods for resetting the radio in a Mitsubishi Outlander:

• Method 1: Using the Radio Button and Volume Knob
• Method 2: Using the Radio Key and Steering Wheel Controls
• Method 3: Disconnecting the Car Battery
• Method 4: Using a Radio Code or Serial Number

By following these step-by-step instructions, you will be able to perform a radio reset on your Mitsubishi Outlander and potentially resolve any issues you are experiencing. Let’s dive into the first method.

Method 1: Using the Radio Button and Volume Knob

If you have a Mitsubishi Outlander with a basic radio system that includes physical buttons and a volume knob, you can try using this method to reset the radio:

1. Start by turning off the ignition and removing the key from the ignition switch. This will ensure that the radio is completely powered off.
2. Wait for a minute or two to allow any residual power to dissipate from the radio system.
3. Turn on the ignition again, but do not start the engine. This will power on the electrical systems in the vehicle, including the radio.
4. Press and hold the power button or the knob to turn on the radio. Hold it for 10-15 seconds to initiate the reset process.
5. After holding the power button or knob, the radio should turn off and then restart. This indicates that the reset has been successful.
6. Check if the radio is now functioning properly. Test the different functions, such as tuning to different radio stations or playing a CD, to ensure that everything is working as expected.

If the radio did not reset or is still experiencing issues after trying this method, you may need to consider using one of the other methods described in this guide.

It’s important to note that the exact steps may vary depending on the specific model and year of your Mitsubishi Outlander. Always refer to the owner’s manual or contact a Mitsubishi dealership for the most accurate instructions for your vehicle.

Now let’s move on to the next method, which involves using the radio key and steering wheel controls to reset the radio.

Method 2: Using the Radio Key and Steering Wheel Controls

If your Mitsubishi Outlander is equipped with steering wheel controls and a radio key, you can try this method to reset the radio:

1. Start by turning off the ignition and removing the key from the ignition switch. Make sure the radio is completely turned off.
2. Locate the radio key, which is a small plastic key included with the vehicle’s documentation or provided by the manufacturer.
3. Insert the radio key into the slot located on the front of the radio unit. The slot is usually small and labeled with a radio icon.
4. Turn the key gently to the left and then to the right. This action simulates the process of resetting the radio.
5. Once you’ve turned the key, remove it from the slot and reinsert it to its original position.
6. Start the ignition and turn on the radio. Use the steering wheel controls to navigate through the menu options and select the “Reset” or “Factory Reset” option.
7. Confirm the reset by following the on-screen prompts or pressing the corresponding button on the steering wheel controls.
8. Wait for the radio to restart and check if it is now functioning properly.

Remember that the steps and menu options may vary depending on the specific model and year of your Mitsubishi Outlander. Consult the owner’s manual or contact a Mitsubishi dealership for precise instructions that are applicable to your vehicle.

If this method does not resolve the radio issues you are experiencing, don’t worry. There are still a couple more methods that you can try. Let’s move on to the next method, which involves disconnecting the car battery.

Method 3: Disconnecting the Car Battery

If you have tried the previous methods and are still facing issues with your Mitsubishi Outlander radio, you can attempt a reset by disconnecting the car battery. Here’s how:

1. Ensure that the vehicle is turned off and the ignition is in the off position.
2. Locate the car battery, which is typically located in the engine compartment. Refer to your vehicle’s owner’s manual if you are unsure of its exact location.
3. Using the appropriate tools, carefully loosen and remove the negative (-) cable from the battery terminal. It’s important to disconnect the negative cable first to avoid any electrical shocks or damage.
4. Leave the negative cable disconnected for approximately 15-20 minutes. This will allow the electrical system in the vehicle to fully discharge and reset.
5. While waiting, it’s recommended to engage the vehicle’s parking brake to ensure safety.
6. After the waiting period, reconnect the negative (-) cable to the battery terminal and tighten it securely.
7. Turn on the ignition and check if the radio is functioning properly. It may take a few moments for the system to fully boot up and for the radio to become operational again.

By disconnecting the car battery, you are essentially resetting all the electronic systems in your Mitsubishi Outlander, including the radio. This method can help resolve issues caused by software glitches or temporary malfunctions.

If the radio still does not work correctly after attempting this method, you may need to consider using the final method described in this guide. Let’s move on to Method 4, which involves using a radio code or serial number.

Method 4: Using a Radio Code or Serial Number

If none of the previous methods have successfully reset your Mitsubishi Outlander radio, it may be necessary to use a radio code or serial number to restore its functionality. Here’s what you need to do:

1. Start by gathering the necessary information. This includes the radio code and serial number, which can usually be found in the vehicle’s documentation or on a card provided by the manufacturer.
2. If you don’t have the code or serial number, you can retrieve it by visiting the official Mitsubishi website or contacting a Mitsubishi dealership. They will require your vehicle identification number (VIN) in order to provide you with the correct information.
3. Turn on the ignition and power on the radio.
4. The radio display should show “CODE” or “ENTER CODE”. Use the radio preset buttons to enter the code digits. Each button corresponds to a number, so press the appropriate buttons to input the code.
5. Once you have entered the code, press the “Enter” or “OK” button to confirm.
6. If the code is entered correctly, the radio should unlock and begin functioning normally.

It’s essential to enter the code accurately to ensure the radio resets successfully. Take your time and double-check the digits before confirming.

If you have tried all the methods described in this guide and are still unable to reset the radio or solve the issues you are facing, it is recommended to seek professional assistance from a Mitsubishi dealership or a qualified automotive technician. They will have the expertise and tools necessary to diagnose and resolve more complex radio problems.

Remember, performing a radio reset may require you to re-enter any saved settings, such as radio presets, Bluetooth connections, and other customizations. Refer to your vehicle’s owner’s manual for instructions on how to restore these settings after a reset.

Hopefully, one of these methods has helped you in resetting your Mitsubishi Outlander radio and resolving any issues you were experiencing. Enjoy your refreshed and fully functional radio system!

Conclusion

Resetting the radio in your Mitsubishi Outlander can be a simple and effective way to resolve issues and restore its functionality. In this guide, we have explored four methods that you can try depending on your specific Outlander model and radio system.

First, we covered the method of using the radio’s physical buttons and volume knob to initiate a reset. This method is suitable for basic radio systems and can often resolve minor glitches.

Next, we discussed how to use the radio key and steering wheel controls to perform a reset. This method is convenient for vehicles equipped with these features and provides an alternative way to initiate a reset process.

If the previous methods do not work, we recommended disconnecting the car battery to reset the radio. This method is more extensive and resets all electronic systems in the vehicle, including the radio.

Lastly, we explored using a radio code or serial number to unlock and reset the radio. This method may require obtaining the code from the vehicle’s documentation or contacting a Mitsubishi dealership.

Remember, it’s important to follow the specific instructions for your Mitsubishi Outlander model and consult the owner’s manual for accurate information. If all else fails, seek professional assistance from a Mitsubishi dealership or qualified technician.

We hope that this guide has helped you in resetting your Mitsubishi Outlander radio and resolving any issues you were experiencing. Enjoy your improved radio experience and happy driving!